GB/T 6371-1995 表面活性剂 纺织助剂 洗涤力的测定

作者:标准资料网 时间:2024-05-21 11:54:30   浏览:9164   来源:标准资料网
下载地址: 点击此处下载
基本信息
标准名称:表面活性剂 纺织助剂 洗涤力的测定
英文名称:Surface active agents-Textile auxiliaries-Determination of detergency
中标分类: 化工 >> 化学助剂、表面活性剂、催化剂、水处理剂 >> 表面活性剂基础标准与通用方法
ICS分类: 化工技术 >> 化工产品 >> 表面活性剂及其他助剂
替代情况:替代GB 6371-1986;被GB/T 6371-2008代替
发布部门:国家技术监督局
发布日期:1995-01-02
实施日期:1996-08-01
首发日期:1986-05-08
作废日期:2008-10-01
主管部门:中国石油和化学工业协会
归口单位: 中国石油和化学工业协会
起草单位:上海染料研究所
出版社:中国标准出版社
出版日期:1900-01-01
页数:平装16开, 页数:5, 字数:5千字
适用范围

本标准规定了用人工污布进行去污试验,通过灰卡评级来评价表面活性剂洗涤力的测定方法。本标准适用于印染工业用阴离子型及非离子型表面活性剂的洗涤力的测定。也可适用于某些阳离子型、两性型及复合型表面活性剂的洗涤力的测定。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 化工 化学助剂 表面活性剂 催化剂 水处理剂 表面活性剂基础标准与通用方法 化工技术 化工产品 表面活性剂及其他助剂
下载地址: 点击此处下载
基本信息
标准名称:出口植物油过氧化值的检验方法
中标分类: 食品 >> 食品综合 >> 基础标准与通用方法
替代情况:被SN/T 0800.3-1999代替
发布日期:
实施日期:1989-07-01
首发日期:
作废日期:
出版日期:
页数:3页
适用范围

没有内容

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 食品 食品综合 基础标准与通用方法
【英文标准名称】:Industrialautomationsystemsandintegration-Productdatarepresentationandexchange-Part403:Applicationmodule:AP203Configurationcontrolled3Ddesignofmechanicalpartsandassemblies
【原文标准名称】:工业自动化系统和集成.产品数据表示和交换.第403部分:应用模块:AP203配置控制的机械部件和组件的三维设计
【标准号】:ISO/TS10303-403-2005
【标准状态】:作废
【国别】:国际
【发布日期】:2005-12
【实施或试行日期】:
【发布单位】:国际标准化组织(IX-ISO)
【起草单位】:ISO/TC184
【标准类型】:()
【标准水平】:()
【中文主题词】:应用;自动化;自动化系统;数据交换;数据表示;工业产品;信息交换;信息技术;过程自动化;产品数据;表示法;三维的
【英文主题词】:Applications;Automation;Automationsystems;Dataexchange;Datarepresentation;Industrialproducts;Informationinterchange;Informationtechnology;Processautomation;Productdata;Representations;Tridimensional
【摘要】:ISO/TS10303-403:2005specifiestheapplicationmoduleforAP203configurationcontrolled3Ddesignofmechanicalpartsandassemblies.ThefollowingarewithinthescopeofISO/TS10303-403:2005:productsthataremechanicalpartsandassemblies;productdefinitiondataandconfigurationcontroldatapertainingtothedesignphaseofaproduct'sdevelopment;representationofaninstanceofapartinanassemblythroughitsusageinasub-assembly;sixgroupsofshaperepresentationsofapartthatincludesadvancedboundaryrepresentation,facetedboundaryrepresentation,manifoldsurfaceswithtopology,geometricallyboundedsurfaceandwireframegeometry,wireframewithtopology,andconstructivesolidgeometryinthree-dimensions;geometricvalidationpropertiestoallowthetranslationofgeometricshaperepresentations(advancedboundaryrepresentationandfacetedboundaryrepresentationsolids)tobecheckedforquality;geometricpresentationofgeometricshaperepresentationsbytheapplicationofcolours,layersandgroups;geometricanddimensionaltolerancesappliedtogeometricshaperepresentations;textualannotationandnotesappliedtogeometricshaperepresentations.
【中国标准分类号】:N18
【国际标准分类号】:35_240_50
【页数】:65P;A4
【正文语种】:英语